EWM PicoMig 180 puls welding machine is a compact and portable MIG/MAG pulse welding machine that's perfect for construction site use with robust casting. This welding machine produces significantly less spatter formation and therefore less finishing work all thanks to the pulse function, improving your welding jobs.
EWM have designed their MIG/MAG welder to be true all-round, from non-alloyed and low-alloy steels, CrNi steel and non-ferrous metals to MIG/MAg pulse or standard welding. Perfect from one-off production to complex production lines.
GMAW pulsed welding of aluminium and aluminium alloys as well as GMAW standard welding applications. Perfect for welding self-shielding flux cored wires.
Key Features:
- Infinitely adjustable arc dynamics (choke effect)
- Synergic or manual welding operation
- Non-latched/latched operation
- Interval welding
- Adjustable gas pre- and post-flow time
- Robust casing suitable for construction site use
- High open circuit voltage for excellent ignition characteristics
- 4-roll drive
- Energy-saving thanks to high efficiency and standby function
- Easy, tool-free change of welding polarity
- Earth fault monitoring (PE protection)
Not the right EWM welder? Don't worry EWM have a wide range of high-quality welders for your needs, see the full range!
EWM PicoMig 180 puls welding machine
Version Picomig 180 puls Picomig puls Setting range for welding current 5 A - 180 A Duty cycle 40° C 180 A /25% 120 A / 60% 100 A / 100% Open circuit voltage 80 V Mains Voltage 1 x 230V Tolerances -40% up to +15% Mains frequency 50 Hz / 60 Hz Recommended Generator Power 8 kVA Wire feed Speed 1 m/min - 15 m/min 39.37 ipm - 590.55ipm Factory-installed roll equipment 0.8+ 1.0mm / steel Spool diameter D200 Torch connection Euro torch connector Protection Classification IP23 EMC Class A Dimensions (LxBxH) 559 mm x 276mm x 340mm 22 inch x 10.9 inch x 13.4 inch
Weight 16kg 35.3Ibs Standards IEC 60974-1, -5 and -10 CL.A - Setting of all welding parameters and functions – easy setting of operating point, pre-programmed JOBs (welding tasks) can be selected from JOB list
- GMAW pulsed welding and GMAW standard welding
- Significantly less spatter formation and therefore less finishing work, all thanks to the pulse function
- GMAW pulse welding of aluminium and aluminium alloys
- Synergic characteristics for steel, CrNi, aluminium and flux cored wires
- MMA welding and TIG lift arc welding
- Perfect for welding self-shielding flux cored wires
- Synergic or manual welding operation
- Non-latched/latched operation
- Interval welding
- Adjustable gas pre- and post-flow time
Operation mode Synergic operation Welding process MIG/MAG MIG/MAG pulse TIG MMA Operating modes Non-latched Latched Resistance spot welding Interval Parameters in display Welding current Wire feed speed Plate thickness JOB number Error code Polarity display Number of JOBs 50 Functions Wire burn-back
